back to SAX-6
The following components are available for monitoring
the pipeline pressure.
Pressure switches. These are
preset for normal line pressures (4 bar & vacuum only). They have a 1/4 BSP
male thread and are supplied with a dowty seal. Maximum over pressure of 300bar
allows pipeline testing without removing pressure switches from the
Manifolds. Manifolds are brass bodies with 15mm
copper stubs and are available as single or twin units. Both types incorporate
minimum leak devices which allow pressure switches to be changed without
dropping pipeline pressure.
Pressure switches & manifolds are
de-greased for use with oxygen & are supplied in sealed packing